BELT STRAPS


Made from tough, high quality 3-4mm leather. Each strap is at least 132cm / 52" long.

Double length straps are available but they may be made from two straps stitched together.

RTLS12 - 1/2" (12mm) Belt strap - £4, US$8
 

* The brown leather is top quality, but shades vary depending upon availability of leather.

RTLS19 - 3/4" (19mm) Belt strap - £5, US$9
 

* The brown leather is top quality, but shades vary depending upon availability of leather.

1 inch wide Strap with knotwork design

RTLS25 - 1" (25mm) Belt strap - £6, US$11

 

* The brown leather is top quality, but shades vary depending upon availability of leather.

RTLS32 - 1 1/4" (32mm) Belt strap - £7, US$13
 

* The brown leather is top quality, but shades vary depending upon availability of leather.

RTLS38 - 1 1/2" (38mm) Belt strap - £8, US$15
 

* The brown leather is top quality, but shades vary depending upon availability of leather.

BRASS FITTINGS

Made from 0.6mm sheet brass.

FG1Belt mounts (Require FWRV1 copper rivets for attachment). Suitable for Roman, Eastern Viking, Norman and Medieval belts £5, US$9 for 10
£33, US$63 for 100
Belt Mount
FG2Belt plaque with dragon design, 12th Century (Requires drilling 4 holes and adding 4 x FWRV2 copper rivets for attachment). £2, US$3.50 each
£10, US$18 for 10
Belt Plaque
FG3Buckle plate. Width 25mm. (Buckle not included). Includes 2 x FWRV1 copper rivets for attachment. £3, US$6 each Buckle Plate
RSBP6BDecorated buckle plate. Designs vary. Width 25mm. Includes 2 x FWRV1 copper rivets for attachment. £12, US$24, €15 each Decorated buckle Plate

COPPER RIVETS

Made from solid copper. A soft metal that is ideal for easy riveting.

Instructions for use of 1/8" domed copper rivet: Make an 1/8" (3mm) hole in the leather using a hole punch. Push the rivet through the leather so that the head of the rivet is pressed against the leather. Push the shaft of the rivet through the metal fitting that you want to attach. Clip off the shaft as close as possible to the fitting using a pair of pliers. Rest the head of the rivet on a piece of leather placed on an anvil and gently peen over the other end of the rivet by striking around it repeatedly with the ball end of a hammer.

FWRV1Domed copper rivets - for attaching brass fittings and strap ends RSSE4, RSSE6, RSSE8 & RSSE9. 1/8" (3mm) x 1/2" (12mm) £3, US$6 for 10
£20, US$37 for 100
FWRV2Domed copper rivets - for attaching strap ends RSSE3, RSSE7 & RSSE10. 1/16" (1.5mm) x 1/2" (12mm) £3, US$6 for 10