BUCKLES, STRAP ENDS & FITTINGS
Make your own belts using our authentic replica Viking, Saxon & Medieval belt buckles, strap ends and belt fittings
Copies of original designs, cast by authentic lost-wax process in polished bronze. All designs are tough, solid and chunky i.e Designed for use!
VIKING / SAXON BUCKLES & STRAP ENDS
Note: All these buckles now come with wire "tongues" (See picture of RSB84B) rather than cast tongues as the wire tongues are stronger.
| RSB45B | Buckle with dot and ring designs found in E.Anglia, England, 8-9th century.
To fit belt strap 25mm wide.
| £20,
US$,
€
|
 |
| RSB44B | Buckle, 7-9th century. Strap width up to 25mm.
| £20,
US$,
€
|
 |
| RSB31B | Buckle found near Liverpool, England, 9-11th century. To fit belt strap 23mm wide.
| £25,
US$,
€
|
 |
| RSB54B | Buckle of common type, in use from Dark Age to Medieval times, 5-15th century.
Strap width up to 20mm.
Out of stock
| £13,
US$,
€
|
 |
| RSB84B | Buckle with zig-zag design. Suitable for Viking, Saxon or Norman.
Strap width up to 25mm.
| £20,
US$,
€
|
 |
| SGS129 | Rus Viking belt buckle made from light coloured bronze.
Strap width up to 20mm.
| £12,
US$,
€
|
 |
| SGS130 | Rus Viking belt buckle made from light coloured bronze.
Strap width up to 19mm.
| £12,
US$,
€
|
 |
| RSSE41B | Irish Strap End, 8-9th century. Width 25mm.
| £13,
US$,
€
|
 |
| RSSE39B | Strap End found in York, 10-11th century. Width 16mm.
(Note: This strap end has pre-drilled holes for attachment (not pictured))
| £13,
US$,
€
|
 |
| RSSE47B | Strap End found in York, 10-11th century. Width 21mm.
Out of stock
| £13,
US$,
€
|
 |
| RSSE37B | Large Viking Strap End, 9-10th century. Width 25mm.
(Note: This strap end has pre-drilled holes for attachment (not pictured))
| £17,
US$,
€
|
 |
| RSSE61B | Large Borre-style Strap End, 9-10th century. Width 23mm.
| £17,
US$,
€
|
 |
| RSSE13B | Winchester strap end, 9-10th century. Width 25mm.
| £17,
US$,
€
|
 |
| RSSE40B | Small Strap End, 9-10th century. Width 9mm.
| £10,
US$,
€
|
 |
| RSSE23B | Strap End found in Coppergate, York, 10th century. Width 11mm.
out of stock
| £10,
US$,
€
|
 |
NORMAN / MEDIEVAL BUCKLES & STRAP ENDS
| RSB70B | Norman Buckle found in London, 11-13th century. Strap width up to 30mm.
| £20,
US$,
€
|
 |
| RSSE38B | Norman Strap End found in London, 11-12th century. Width 19mm.
| £13,
US$,
€
|
 |
| RSB51B | Norman Buckle with integral buckle plate in Romanesque style, 11-12th century. Strap width 23mm.
out of stock
| £30,
US$,
€
|
 |
| RSSE19B | Norman Strap End in Romanesque style, 11-12th century. Width 19mm.
| £15,
US$,
€
|
 |
| RSB54B | Buckle of common type, in use from Dark Age to Medieval times, 5-15th century.
Strap width up to 20mm.
out of stock
| £13,
US$,
€
|
|
| RSB84B | Buckle with zig-zag design. Suitable for Viking, Saxon or Norman.
Strap width up to 25mm.
| £20,
US$,
€
|
|
| SGS109A | Medieval Buckle. To fit belt strap 10mm wide.
| £5,
US$,
€
|
 |
| SGS109B | Medieval Buckle. To fit belt strap 13mm wide.
| £6,
US$,
€
|
 |
| SGS109C | Medieval Buckle. To fit belt strap 14mm wide.
| £7,
US$,
€
|
 |
| RSB72B | Late Medieval Spectacle Buckle, 14-17th century. To fit belt strap 12mm wide.
Out of stock
| £15,
US$,
€
|
 |
| RSB69B | Large Foliate Medieval D Buckle, 13-15th century. To fit belt strap 25mm wide.
| £24,
US$,
€
|
 |
| RSSE25B | Late Medieval Strap End, 14-15th century. Width 12mm.
| £10,
US$,
€
|
 |
BELT STUDS
Suitable for Viking or Medieval
Each belt stud consists of a flower mount and a sprig for attachment, all cast together in one piece.
How to attach: Punch a 2mm round hole through the leather, push the sprig
through,
clip it off
to size and then rivet it flat against the leather with the ball end of a hammer, ensuring that you protect the mount from damage by placing another piece of leather beneath it.
Note: The sprig is now thicker and shorter than the one pictured
| RSS6B | Bronze flower stud, width 11mm. |
£8,
US$,
€
Each
-
£35,
US$,
€
for 5
£56,
US$,
€
for 10
|
 |
| RSS6S | Silver flower stud, width 11mm. |
£120,
US$,
€
for 10
out of stock
|
STERLING SILVER AND BRONZE BELT SETS
SOLID BRASS "D" BUCKLES & "O" RINGS
Suitable for basic historical belts, straps and baldrics from all periods.
| BABU12 | Brass Buckle, to fit 1/2" (12mm) strap
| £1.50,
US$,
€
|
 |
| BABU20 | Brass Buckle, to fit 3/4" (20mm) strap
| £2,
US$,
€
|
 |
| BABU25 | Brass Buckle, to fit 1" (25mm) strap
| £2.50,
US$,
€
|
 |
| BABU32 | Brass Buckle, to fit 1 1/4" (32mm) strap
| £3,
US$,
€
|
 |
| BABU40 | Brass Buckle, to fit 1 1/2" (40mm) strap
| £3.50,
US$,
€
|
 |
| BARI25 | Brass ring, 1 inch (25mm)
| £1.50,
US$,
€
|
 |
| BARI50 | Brass "axe" ring, 2 inch (50mm)
| £2.50,
US$,
€
|
| BARI75 | Brass "axe" ring, 3 inch (75mm)
| £3.50,
US$,
€
|
| RTAR1 | Axe hanger with 2 inch ring on leather strap
| £12,
US$,
€
|
|
BELT STRAPS
Made from tough, high quality 3-4mm leather.
Each strap is at least 132cm / 52" long.
Double length straps are available but they may be made from two straps stitched together.
| KRLS12 - 1/2" (12mm) Belt strap - £5,
US$,
€
|
| KRLS19 - 3/4" (19mm) Belt strap - £6,
US$,
€
|
KRLS25 - 1" (25mm) Belt strap - £8,
US$,
€
|
| KRLS32 - 1 1/4" (32mm) Belt strap - £9,
US$,
€
|
| KRLS38 - 1 1/2" (38mm) Belt strap - £10,
US$,
€
|
KRLS38 - 1 1/2" (38mm) embossed knotwork belt strap - £25,
US$,
€
|
| KRLS45 - 1 3/4" (45mm) Belt strap - £12,
US$,
€
|
BRASS FITTINGS
Made from 0.6mm sheet brass.
| FG1 | Belt mounts (Require FWRV1 copper rivets for attachment). Suitable for Roman, Eastern Viking, Norman and Medieval belts. Width 19mm. |
£5,
US$,
€
for 10
£30,
US$,
€
for 100
|
 |
| FG2 | Belt plaque with dragon design, 12th Century (Requires drilling 4 holes and adding 4 x FWRV2 copper rivets for attachment). Dimensions 25mm x 50mm. |
£2,
US$,
€
each
£15,
US$,
€
for 10
|
 |
| FG3 | Buckle plate. Width 25mm. (Buckle not included). Includes 2 x FWRV1 copper rivets for attachment. |
£3,
US$,
€
each
|
 |
| RSBP6B | Decorated buckle plate. Designs vary. Width 25mm. Includes 2 x FWRV1 copper rivets for attachment. |
£12,
US$,
€
each
|
 |
COPPER RIVETS
Made from solid copper. A soft metal that is ideal for easy riveting.
Instructions for use of 1/8" domed copper rivet: Make an 1/8" (3mm) hole in the leather using a hole punch. Push the rivet through
the leather so that
the head of the rivet is pressed against the leather. Push the shaft of the rivet through the metal fitting that you want
to attach. Clip off the shaft as close as possible to the fitting using a pair of pliers. Rest the head of the rivet on
a piece of leather placed on an anvil and gently
peen over the other end of the rivet by striking around it repeatedly with the ball end of a hammer.
| FWRV1 | Domed copper rivets - for attaching brass fittings and strap ends RSSE4, RSSE6, RSSE8 & RSSE9. 1/8" x 1/2" (2.5mm x 12.5mm) | £5,
US$,
€
for 10
£28,
US$,
€
for 100
|
 |
| FWRV2 | Domed copper rivets - for attaching strap ends RSSE3, RSSE7 & RSSE10. 1/16" x 1/2" (1.25mm x 12.5mm) |
£4,
US$,
€
for 10
£24,
US$,
€
for 100
|
 |
IRON BUCKLES
Hand made on a traditional forge. This type of buckle was popular during the Iron Age, but was also in use right up to
the Viking
age.
| TMB5 | Iron Age / Viking Buckle, width 5cm
| £22,
US$,
€
|
 |
 |
|
