Norman & Medieval Belts

MADE TO ORDER BELTS

* The brown leather is top quality, but shades vary depending upon availability of leather.

* The brown leather is top quality, but shades vary depending upon availability of leather.

* The brown leather is top quality, but shades vary depending upon availability of leather.

* The brown leather is top quality, but shades vary depending upon availability of leather.

* The brown leather is top quality, but shades vary depending upon availability of leather.

Select which belt you would like to order by choosing one of the boxes above.
Then select your requirements from the pop-up menus in the box.
Select waist size. Remember to allow plenty of room for clothing - preferably measure an old belt. Four waist holes will be punched at 1.5 inch / 4cm intervals as follows (-1.5, 0, +1.5 and +3 inches). Actual strap length will be about 16 inches / 41cm longer than waist size to allow for dangling strap end. Longer straps will be made from two strips of leather stitched together.
Standard length belts are between 54 and 60 inches (137-152cm) long in total. Actual length depends upon the leather available. No waist holes will be punched in standard length belts. If you want a longer or shorter belt than the standard then please use the additional information box.
Enter any special requirements in the additional information box e.g. Request a total strap length that differs from the usual additional 16 inches / 41cm.
After entering your requirements click the "Add to cart" button.
You can click on one of the links at the top of this page to get more information on each component or to purchase individual components for making your own belts.