PATTERN WELDED VIKING SAEXES WITH DAMASCUS STEEL BLADES

The types of steel used in the construction match as closely as possible to those that would have been used originally. The back of the blade is made from 200 year old wrought iron. The middle layer is made from dissimilar steel rods, twisted into a swirl pattern of Damascus steel. The edge is made from hardened high-carbon steel.

PBDMSA03 - Pattern welded Viking saex blades

A masterpiece of the blacksmiths art, these saex blades are entirely handmade in England by a master smith.

The types of steel used in the construction match as closely as possible to those that would have been used originally. The back of the blade is made from 200 year old wrought iron. The middle layer is made from dissimilar steel rods, twisted into a swirl pattern of Damascus steel. The edge is made from hardened high-carbon steel.

#1 HOGSBACK SAEX - Blade length 23cm. Blade thickness at back 4mm. Weight 260g - SOLD

#2 VIKING SAEX 10-11th century - Blade length 19cm. Blade thickness at back 4mm tapering to 1mm. Weight 130g - SOLD

PBDMSA01 - Pattern welded Viking saex blades

A masterpiece of the blacksmiths art, these saex blades are entirely handmade in England by a master smith.

The types of steel used in the construction match as closely as possible to those that would have been used originally. The back of the blade is made from 200 year old wrought iron. The middle layer is made from dissimilar steel rods, twisted into a swirl pattern of Damascus steel. The edge is made from hardened high-carbon steel.

#1 HOGSBACK SAEX - Blade length 24cm. Blade thickness at back 4mm. Weight 190g - SOLD

#2 HOGSBACK SAEX - Blade length 22.5cm. Blade thickness at back 5mm. Weight 205g - SOLD

#3 SAEX - Blade length 19.5cm. Blade thickness at back 3mm. Weight 140g - SOLD

#4 SAEX - Blade length 17cm. Blade thickness at back 3mm. Weight 110g - SOLD