Viking Bows & Arrows

Also replica Viking arrowheads & archery blunts

Our Viking style bows are designed for re-enactment use as they have a safe draw weight to avoid serious injury. Our arrows have steel-tipped ends but should be used with archery blunts during re-enactment for safety and we have rubber, or horn blunts for sale too. We also have replica hand-forged Viking arrowheads for sale to be used as decorative or display use.

Viking Style Bows

Designed for re-enactment use, so the average draw weight is around 35 lbs. (Other draw weights are available upon request). They can also be used for regular archery practice & each come with a six month guarantee*. Some simple rules must be followed by the serious archer: ALWAYS warm the bow up by vigorous rubbing with a cloth immediately before use, and then draw the string back a few times, increasing the length of the draw each time until you reach the maximum draw length of 28". NEVER draw the string back more than 28" (70cm). NEVER leave the bow near a radiator or other heat source, ideally leave it out in the shed where the wood will not become too dry. ALWAYS string and un-string the bow gently and smoothly without twisting it.

GAB02 - Viking Style Flat Bow - Large

GAB02 - Viking Style Long Bow

Laminated wood, Viking-style flat bow - large

  • Length 62" (157cm).
  • Draw weight 16kg (35lb).
  • Weight 500g (1.1lb).

GAB02 - Viking Style Long Bow:
£179.00 (US$ | €)

GAAR - Metal-Tipped Re-enactment Arrows

GAAR - Metal-Tipped Re-enactment Arrows

Metal tipped target arrows.

  • Arrow - length: 87cm (34.25"), diameter: 7-8mm (0.3").
  • Weight 30g (1.05oz).
  • Present arrows have either red & blue, or green & white flights.

GAAR - Metal-Tipped Re-enactment Arrow x 1:
£8.00 (US$ | €)

GAAR - Metal-Tipped Re-enactment Arrow x 5:
£35.00 (US$ | €)

Arrowheads

Hand-forged iron, replica Viking arrowheads with sockets or tangs.

SGS188A - Hand-Forged Arrowhead with Socket - Iron

SGS188A - Hand-Forged Arrowhead with Socket

Hand-forged iron re-enactment arrowhead with socket.

  • Sharp point and semi-sharp edges.
  • Length 80mm (3.15").
  • Weight g (lb).

SGS188A - Hand-Forged Arrowhead with Socket:
£6.00 (US$ | €)

SGS113 - Hand-Forged Arrowhead with Tang - Iron

SGS113 - Hand-Forged Arrowhead with Tang - Iron

Hand-forged iron re-enactment arrowhead with tang.

  • Sharp point and semi-sharp edges.
  • Length up to 120mm (4.7").
  • Weight g (lb).

SGS113 - Hand-Forged Arrowhead with Tang - Iron:
£7.00 (US$ | €)

Archery Blunts & Bow Knocks

Specially designed to be loosed at opponents during re-enactment battles. Care and special training should be undertaken to avoid contact with eyes and other sensitive areas. Only designed for low poundage bows and should only be used for re-enactment bows.

ABB1 - Rubber Archery Blunts

ABB1 - Rubber Archery Blunts

Black rubber arrow blunts for re-enactment.

  • Specially designed to pop over the end of your arrows for safe impact.
  • Only to be used with bows under 40lb (18kg) draw weight.
  • Buy singles, or packs of 5.

ABB1 - Rubber Archery Blunt x 1:
£2.50 (US$ | €)

ABB1 - Rubber Archery Blunt x 5:
£10.00 (US$ | €)

HWOHT - Ox Horn Tips - 1kg

HWOHT - Ox Horn Tips

1kg (2.2lb) of black ox horn tips.

  • Ideal for making bow nocks.
  • Approx. 10 tips per kg.

HWOHT - Ox Horn Tips - 1kg:
£35.00 (US$ | €)