Viking Helmets

Jelling Dragon Viking Helmets

Battle ready, re-enactment Viking helmets, Saxon helmets, Norman helmets for reenactment.

The following helmets are designed to withstand the rigours of re-enactment combat. Each are made from either 14 gauge (1.9mm) or 16 gauge (1.5mm) polished sheet steel with steel rivets. Inside each helmet is an adjustable leather liner and leather chin strap so your helmet will fit perfectly and stay on during battle.

Before ordering then please make sure you are ordering the right size as these can be costly in postage to return. If you are unsure then email with your head circumference and whether you are looking to get one with or without an arming cap.

PHAB0400 - Spangenhelm with Wide Nasal

PHAB0400 - Spangenhelm with Large Nasal - Large

9 - 12th century replica helmet from Europe and Scandinavia.

  • Battle ready for Norman / Viking re-enactment.
  • Made from 16 gauge (1.5mm) polished steel plates.
  • Internal circumference 64 - 66cm (25 - 26"), but leather lining can be adjusted to fit.
  • Weight 2.5kg (5.5lb).
  • Complete with adjustable leather lining & chin strap.
  • One size fits most.

PHAB0400 - Spangenhelm with Large Nasal:
£99.00 (US$ | €)

PHAB0416 - Spangenhelm with Narrow Nasal

PHAB0416 - Spangenhelm with Narrow Nasal - Large

9 - 12th century replica helmet from Europe and Scandinavia.

  • Battle ready for Norman / Viking re-enactment.
  • Made from 16 gauge (1.5mm) polished steel plates.
  • Internal circumference 64 - 66cm (25 - 26"), but leather lining can be adjusted to fit.
  • Weight 2.5kg (5.5lb).
  • Complete with adjustable leather lining & chin strap.
  • One size fits most.
  • Presently out of stock and unsure of restocking date at present.

PHAB0416 - Spangenhelm with Narrow Nasal:
£99.00 (US$ | €)

PHAB0484 - Gjermundbu Viking Helmet

PHAB0483 / 484 - Gjermundbu Viking Helmet

10th century Viking helmet from Norway.

  • Battle ready for Viking re-enactment.
  • Available without top spike, so please ask when ordering.
  • Made from 14 gauge (1.9mm) polished steel plates.
  • Internal circumference 64 - 66cm (~26"), but leather lining can be adjusted to fit.
  • Weight 2.4kg / 2.7kg (5.4lb / 6lb).
  • Complete with adjustable leather lining & chin strap.
  • One size fits most.

PHAB0484 - Gjermundbu Viking Helmet - Large:
£95.00 (US$ | €)

PHAB3952 - Gjermundbu Viking Helmet with Aventail

PHAB3952 - Gjermundbu Viking Helmet with Aventail

10th century Viking helmet with aventail from Norway.

  • Battle ready for Viking re-enactment.
  • Available without top spike, so please ask when ordering.
  • Made from 14 gauge (1.9mm) polished steel plates.
  • Internal circumference 64 - 66cm (~26"), but leather lining can be adjusted to fit.
  • Weight 3.5kg (7.7lb).
  • Complete with adjustable leather lining & chin strap.
  • One size fits most.

PHAB3952 - Gjermundbu Viking Helmet with Aventail:
£125.00 (US$ | €)

PHAB0521 - Coppergate Helmet

PHAB0521 - Coppergate Helmet - Large

8th century helmet found in a Viking / Saxon house in Coppergate, York, England.

  • Battle ready for Viking / Saxon re-enactment.
  • Made from 14 gauge (1.9mm) polished steel plates
  • With brass decoration, hinged cheek flaps and riveted mail aventail.
  • Internal circumference 64 - 66cm (~26"), but leather lining can be adjusted to fit.
  • Weight 4.6kg (10.3lb).
  • Complete with adjustable leather lining & chin strap.
  • One size fits most.

PHAB0521 - Coppergate Helmet - Large:
£275.00 (US$ | €)

PHAB0524 - Valsgärde Viking Helmet

PHAB0524 - Valsgärde Viking Helmet. - Large

7th - 8th Century replica helmet from Valsgärde, Sweden.

  • Battle ready for early Viking / late Vendel re-enactment.
  • Made from 14 gauge (1.9mm) polished steel plates.
  • Internal circumference 64 - 66cm (~26"), but leather lining can be adjusted to fit.
  • Weight 3.8kg (8.5lb).
  • Complete with adjustable leather lining & chin strap.
  • One size fits most.

PHAB0524 - Valsgärde Viking Helmet. - Large:
£225.00 (US$ | €)

PHAB0313 - Padded arming cap

PHAB0313 - Padded arming cap

Arming cap to pad out your helmet and protect your head.

  • Provides both scalp protection against abrasion and shock absorption.
  • Crafted in padded cotton-canvas with neck ties.
  • Thickness around 1.25 - 2cm (0.5 - 0.8")
  • Weight 235g (8.3oz).
  • One size fits most.

PHAB0313 - Padded arming cap:
£15.00 (US$ | €)

PHOB3064 - Wooden Helmet Stand

PHOB3064 - Wooden Helmet Stand

Wooden helmet stand painted black.

  • Comes flat-packed in 3 screw-together pieces.
  • Height 35cm (14"), base width 20cm (8"), shaft diameter 3.5cm (1.4").
  • Weight 780g (1.75lb).

PHOB3064 - Wooden Helmet Stand:
£20.00 (US$ | €)